Replica Props

Latest Boba Fett stuff.

feeds@yuku.com (TonyRB) — Mon, 12 May 2008 19:48:45 GMT

The Ca-Boots come in box as un-altered light coloured boot, not accurate, the other photo is of the final weathering with arcylics.

Below is my...

Star Trek PADD's

feeds@yuku.com (starfighter66) — Sat, 10 May 2008 18:11:40 GMT

What do you think of these?

DID STAR WARS AND 007 SHARE PROPS??

feeds@yuku.com (Wellington1) — Wed, 07 May 2008 20:14:34 GMT

Pop in Moonraker and watch the scene where Bond is wrestling the snake. There is a kind of alter on that set where a chest can be seen. It looks very much like the chest Obi Wan take Lukes sabre out of in SW. I have seen the same kind of chest in another Bristsh movie, but the film title escapes me like logic escaping George Bush. Also in Moonraker, when Bond and Holly Goodhead are on the space station sneaking around, Bond rips some wires out from under a console. Hollygood head is...

DID STAR WARS AND 007 SHARE PROPS??

feeds@yuku.com (Wellington1) — Wed, 07 May 2008 20:14:32 GMT

SDS Order Problems?

feeds@yuku.com (baltazar4) — Tue, 06 May 2008 18:10:13 GMT

I just wanted to find out if others are getting their recent orders fulfilled from SDS Props. I ordered a helmet from AA at the end of March during his 25%off sale and still have not received my item. I have e-mailed him several times since then he keeps saying it will be a couple of weeks. I am aware of his current legal issues and wonder if in a couple weeks his company will be able to fulfill my order any longer, as I have heard the judgement with the LFL/ SDS case is coming down soon. Has...

ROTJ Rancor steel door button question

feeds@yuku.com (Wellington1) — Mon, 05 May 2008 23:16:49 GMT

Hello: there was a recent ebay auction for a replica of the button Luke throws the skull at in the rancor pit. Seller stated this was made from kit parts. Any one know the kit??

UK Folk - the VCRA and collecting Replica Imitation Firearms

feeds@yuku.com (S1999Eagle) — Fri, 02 May 2008 22:29:34 GMT

Important news here: http://forum.alienslegacy.com/viewtopic.php?t=4037

Big thread but worth following.

Operation M1 Garand

feeds@yuku.com (Knightwalker11) — Wed, 30 Apr 2008 15:02:58 GMT

well here it goes as some of u know im scratch building a M1 garand ive posted my progress on the ukg board but ive
thought ill show on here aswell
heres wat i started i drew out a template on paper

then i transfered this on to the board

as you can see the board is...

Star Trek TOS crew chairs how to??

feeds@yuku.com (Wellington1) — Mon, 28 Apr 2008 23:07:26 GMT

Hello. Anyone know of a tutorial for converting a Burke chair to a TOS crew station chair? Thanks

Project Cube

feeds@yuku.com (Maverick118) — Sat, 26 Apr 2008 18:58:00 GMT

Well a lot of you know me for making props from the most basic of materials like card and hot glue and sticky back platic and washing up bottle But that's only scratching the surface of what i get up to nowadays between my real job as a postie and Union man, and my hobbies of film making and Special effects make up. Right now I've almost finished up on a unusual commission. a companion cube from the game Portal.

Glue Troubles.

feeds@yuku.com (invetro) — Thu, 24 Apr 2008 19:06:17 GMT

I glued my magazine onto my blaster and I did have it sitting at a perfect 90 degree angle, but it must have slipped when I let go of it, so now it's at about 80 degrees. Is there any way of making the two part epoxy I used let go of it so I can reglue it into a better position?

Special Title for Simon (sidewinder forge) the prop party MASTER

feeds@yuku.com (tangod fett) — Wed, 23 Apr 2008 19:10:59 GMT

For his massive commitment to all the prop parties he has attended Simon will now have the special title of events co-ordinater. Simon has attended every day of every prop party over the past few years and his MASSIVE collection covered at least 3/4 of each display. As well as this he has done 2 Boba Fett blaster building workshops and the finished EE-3s were auctioned for a worthy charity. Good on ya Si .

All Hail the Prop Party Master and bow ...no yield before his...

Help needed and Congratulations to Steve and Martin

feeds@yuku.com (Skywalkersbabe) — Mon, 21 Apr 2008 21:01:42 GMT

Well hello everyone! I have been away for a while, as usual life never runs smooth and pennies are tight but I'm still trying to sort out my costume.....for all those who can't remember it Battle Padme.

But before I go any further can I just say a few words...................I'm away for 4 months or so and I come back and Steve and Martin are Mods!!, whose next.....Simon Seriously...

Sith Probe Droid

feeds@yuku.com (Madwelshman) — Fri, 18 Apr 2008 19:37:59 GMT

Well, finally finished one of my "little" projects at last! though as you all know, its sometimes the smaller ideas that take the longest to take shape.

Not near the same standards as other members on this forum, but I'm chuffed with how it came out.

Started as a toy interactive game, you had a saber, with i.r. that activated foam disks, fired from the front of the droid. Scale wise, its a fraction smaler than 1:1, but close enough.

Welcome Marverick118 as the latest Moderator.

feeds@yuku.com (TonyRB) — Thu, 17 Apr 2008 19:27:38 GMT

I'd like to welcome Martin (Maverick118) to the RPB team as a Moderator, Martin is a very skilled prop maker, over the years he has helped many a person on here and has played a major part the prop parties.

Welcome Martin

Tony

scratch build rocket pack

feeds@yuku.com (hikz) — Mon, 14 Apr 2008 18:22:13 GMT

Hi guys this is my first post here, I'm a memeber of the UKG and have started to put together a rocketeer costume, As you can see from the pictures i have some bits already and have started on the rocketpack. As you can see its at an early stage and still needs alot of work. Tony (TK300) suggested i post it on here as i might get some much needed help and guidance from you guys.

all the best
jamie

MIM Pulse Rifle M41a kit question

feeds@yuku.com (mrunneals) — Sun, 13 Apr 2008 09:51:09 GMT

Does anyone know if the Cybergun Thompson AEG will work with the MIM M41a kit or does it only work with the Marui Thompson. Also will Marui magazines work with the Cybergun? I've heard the M41 uses the shorter magazine.

3th pulse rifle in the making (update finished)

feeds@yuku.com (michellejordi) — Wed, 09 Apr 2008 19:33:52 GMT

this is my 3th pulse rifle
this one will be made out of mdf wood and pvc also like the other ones.but this one will be more accurate like the mag. release button
and.. o ya an metal stock.

Tutorials section

feeds@yuku.com (tangod fett) — Thu, 27 Mar 2008 19:04:21 GMT

The tutorials section has now been made read only , please post any comments here or open a thread if you prefer.We have done this to generate a bit more discussion (hopefully !) in the prop section .Please post any requests or ideas for Tutorials here as well ,and if you have a tutorial to add just ask any of the staff and we will give you clearance there

Punisher costume - Current progress...

feeds@yuku.com (UK Trooper) — Sun, 16 Mar 2008 20:22:23 GMT

Guys and girls,
I've been working on the punisher costume for quite a while and I thought it would be interesting to show the differences between the first attempt and my current. I've been through a bit of a ride with this costume - at times getting sick of it and almost getting rid of it, but in the end I decided I wanted to finish it, but that I wasn't happy with what I had.
I've upgraded almost everything, but I've still got a way to go.
Also want to...