this one will be made out of mdf wood and pvc also like the other ones.but this one will be more accurate like the mag. release button
and.. o ya an metal stock.
ammoclip release switch
the spascage is made from an pvc pipe. i cut the pipe in half (in the lenght you now you get a C shape)heated up in the stoof untill its soft and rapid it around a wooden template.
drill holes and with the dremel cut away pvc between the holes to make the vent.holes
trigger part grenade launcher., yellow trigger +spring,red screw,bleu metal pin (nail)
it works great the trigger springs back. the flat spring is made out of an piece pvc. what i bend a little.
grenade launcher reload part closed,where the grenade shell comes out is open.
and grenade reload part open,where the grenade shell comes out is now closed.some of you ask me,. how i formed the pvc pipes.well....
this is how i did it
step 1.
make some wooden molds for the spasscage and trianglevent.
step 2.
cut some pvc pipes of the right lenght ( i little longer then measured it shrinks when heated)
cut the pipes in the lenght.
step 3.
put the piece of pipe in the stoof (220c) dont keep your eyes of the piece. it must be soft not burned.
when it's soft take it out.and rappid it around the mold.for the spasscage i use an towel to push the pvc on the mold.
for the pumpgrip i put an towel over the wooden mold. take the pvc out of the stoof lay it on the mold (with towel) and take another towel to push it in shape.
for the trianglevent. take the piece of pvc out of the stoof lay it on a flat surface then lay the mold in the middle and push the sides of the pvc to the mold with flat wood.
i hope this explanes it to you all.
the trangle vent.ready accept for the sling... ring????
the spasscage is ready...almost.
metal stock scrab build and
some other metal parts.
scrab build ammo clip from a tin can.
making the spaspump grip.
also made from PVC.and Bondo.
as promised.pics of the painted spasscage.
the spasscage is painted flatblack and dry brushed with silver.
the vent is flat black.
making the grooves in the pump grip.

this piece is ready.
test fit of the parts and shrouds.
only thing to do is painting the shrouds


















